66 ADVIA 2400 Operator’s Guide
Figure 2-1. Power panel at Startup
The power indicator (2) is on, and the Start (4) and Ready (3) indicators start flashing
when the communication to the PC is established.
4. At the Startup window, do the following:
a. In the Please enter password box, enter the user password.
User passwords assigned in the User Code Settings window are not case
sensitive.
b. Select New Start or Re-start, then select
OK.
After a few minutes, the Menu Panel and the Operation Panel open.
CAUTION
Make sure that all probes and mixers are free to move without obstruction and that all
analyzer covers are in place to avoid possible injury and damage to the analyzer
5. When the Start and the Ready indicators are off, and the Initialize button on the
Operation Panel activates (turns black), select
Initialize.
6. At the Windows desktop, double-select the rack handler icon.
7. Log on as
supervisor or tech_manager, if required.
Performing a system-assisted startup (Start set)
1. Verify that sufficient system reagents and wash solutions are available for the startup
you want to run.
2. At the Menu Panel, select
Maint. then select System Startup/Shutdown Settings.
3. In the Mode set list, select
Start set.
To Next Page
Loading...
