Operating the System 75
Creating a profile
1. At the Menu Panel, select Request, then select Order Entry.
2. Select
Create Profile.
3. In the Profile set no. box, enter the profile number (1 to 150).
4. In the Comment box, enter appropriate text.
Because the first 8 characters are used to identify the profile on the Order Entry
window, you can use these characters for the profile name, and the remaining space
for any additional information.
5. Select
Test table.
6. Select each test you want in the profile, then select
Return.
Select buttons below the Test table to get more tests.
7. Select
Execute.
Creating a load list
NOTE: A load list contains only workorders that have position numbers. To include
workorders currently without position numbers, use Creating List.
1. At the Menu Panel, select Request, then select Order Entry.
2. Select
Create List.
3. Select
All or, if you want to specify a range of position numbers, select Posi.no.
4. If you selected
Posi.no., define the tray and cup position.
a. In the Last no. entry format area, select the means of determining the last sample
in step 4c.
b. In the Start no. box, enter the position number for the first sample in the load list.
c. In the Last no. box, enter the position number for the last sample in the load list
or type the number of samples you want in the load list.
5. Select
Execute.
The system creates the load list and displays it at the
Worksheet window.
6. To print the load list, select
Print.
To Next Page
Loading...
