178 ADVIA 2400 Operator’s Guide
Appendix A – Safety Information
Warning and hazard statements
Biohazard warning
BIOHAZARD
All products or objects that come in contact with human or animal body fluids
should be handled, before and after cleaning, as if capable of transmitting
infectious diseases. Wear facial protection, gloves, and protective clothing.
The operator should follow the recommendations to prevent the transmission of
infectious agents in health-care settings as recommended by the Clinical and
Laboratory Standards Institute (formerly NCCLS) in Protection of Laboratory
Workers from Occupationally Acquired Infections; Approved Guideline - Third
Edition. 2005. CLSI Document M29-A3. This document contains complete
information on user protection and it can be used as reference material for
instructions on laboratory safety.
Electrical warning
ELECTRICAL WARNING
To avoid exposure to shock hazards and/or damage to the instrument while
performing this procedure, power off the analyzer before proceeding.
Laser warning
LASER WARNING
To avoid damage to the eyes, never look directly at the laser beam or at its
reflection from a shiny surface. All field service procedures must be followed
precisely. Only Siemens-trained field service personnel should perform
procedures related to laser assemblies.
CAUTION
The use of optical instruments with this product will increase eye hazard.
For more safety information and laser specifications, refer to the Regulatory Compliance
section in this guide.
To Next Page
Loading...
