System Overview 47
User Maintenance window
Perform any of the following tasks at this window:
• water blank measurement
• cell blank measurement
• batch printing
• filing of measurement data
• save of text file
System Monitor window
Perform any of the following tasks at this window:
• verify operating conditions (daily procedures)
• set the system monitor (system settings)
System Maintenance Monitor window
Perform any of the following tasks at this window:
• enter schedules for maintenance tasks
• monitor the maintenance status of the system
• delete maintenance records
Lamp Energy Monitor window
Perform any of the following tasks at this window:
• check the spectrophotometer lamp energy
• perform offset analog to digital (AD) measurement
ISE Operation window
Use this window to perform various ISE tasks.
There is a display area at the top of the window where you can view the running status.
Perform any of the following tasks at this window:
• buffer prime
• calibration
• wash electrode
• CV check
• interval check
• selectivity check
• final operation
• manual operation
• ISE line wash
• Dilution bowl drain
• initialize
• batch print
• periodic wash
• enter information about each electrode
To Next Page
Loading...
