Siemens ADVIA 2400 - Deleting a Specific Sample Log Entry; Deleting All Sample Log Entries; Printing a List of the Sample Log Entries

Operating the System 85
Deleting a specific sample log entry
1. Select the sample log entry you want to delete.
2. Select
Clear.
3. To confirm, select
Yes.
Deleting all sample log entries
1. Select All Clear.
2. When the All Clear dialog box opens, do one of the following:
a. If you want to delete all entries for a specific day, select
Day.
b. In the list box, select the file containing the sample log entries you want to delete.
The file for the current day is selected automatically.
c. If you want to delete the entire sample log, select
All.
3. Select
OK.
4. To confirm, select
Yes.
Printing a list of the sample log entries
1. At the File menu, select Print Setup.
2. Verify that all printing options are correct, then select OK.
3. Select
Print Log Summary.
4. Verify that the aspiration dates and times represent the range of sample log entries
you want printed.
a. Change an aspiration date using the format YYYYMMDD where YYYY is the
year (2006), MM is the month (01 to 12), and DD is the day (01 to 31).
b. Change an aspiration time using the format HH:MM:SS where HH is the hour
(00 to 24), MM are the minutes (00 to 60), and SS are the seconds (00 to 60).
5. Select
Print.