System Overview 45
Correlation window*
Use this window to create and display correlation charts and the data that displays in the
charts.
When needed, use the correlation data to create a real time correction formula in the
Analytical Parameters (Chemistry) window (or ISE Parameters of Setting window).
Perform any of the following tasks at this window:
• display charts
• display chart data
• create charts (add data automatically)
Use this procedure if the measurement data comes from the system
• create charts (add data manually)
Use this procedure if the measurement data comes from another blood chemistry system
• print charts
• delete charts
Calibration windows
Select Calibration to display the following Calibration menu.
View Calibration Curve window
Use the View Calibration Curve window to review the detailed calibration curve data for
a method, to restore a calibration, to monitor calibration trends, to obtain a summary of
all calibration information and to view RBL and calibration check information.
NOTE: While running calibrations or processing samples, the View Calibration Curve
window is closed and cannot be viewed until the analyzer returns to the Ready or Wait
mode.
Calibration/RBL History
The system stores data for up to 100 calibration/RBL events for each of 2
different reagent lot pairs (R1 and R2), for a total of 200 data sets per method.
Use the Calibration/RBL History window to:
• review the calibration history for all methods run on the system
• print the displayed calibration data
• generate a CSV file for displayed calibration data
To Next Page
Loading...
