Siemens Cerberus CS1140 Planning

e4595e−0
1
Fire & Security Products
Siemens Building Technologies Group
05.2003
About this document
Purpose
This document describes the project planning of the hardware modules of the control unit
CS1140. The consistent adherence to these instructions ia a prerequisite for a safe ap-
plication.
Scope
This document contains information on all CS1140 components for EP7F, including part
numbers for ordering.
Target group
This product documentation and the work instructions are aimed at the following persons,
who have a particular function and have the corresponding training and qualification.
Group of persons Activity Qualification
Project Manager The project manager is responsible
for the local project management.
He co–ordinates the schedules of
all groups of people working on a
project as well as resources. He
also continuously obtains the tech-
nical information required for pro-
ject realization.
He has had the technical training
appropriate to his function and the
size of a project or the product line
used in the project and has atten-
ded the training courses for project
managers at the supplier’s works.
Reference documents
Information in document
e1260 Hardware description modules (CS1140 ’Modular’)
e1393 Installation H26../H28.. housing
e1971 Installation H37.. housing
e1273 Installation H38.. housing
e1274 Installation H47.. housing
e1275 Installation H67.. housing
e1669 Paging interface card K3I090, Technical manual
e5377 Compact control unit CI1145
e4665 Operating instructions AlgoPilot B3Q4..
e4598 Operating instructions AlgoPilot B3Q6..
e5590 Operating instructions extinguishing section B3Q4..
e5113 Operating instructions extinguishing section B3Q6..
e4594 Commissioning Hardware (CS1140 ’Modular’)
e5109 Commissioning Extinguishing
e825 Key figures for collective detection lines
e1204 Fire detection in explosion-hazard areas
e1508 Guideline for connection factors, line resistances, etc.
e1062 Communication module, modem application
e1594 C–Bus, technical description
e4282 FlashTool Operation
x1099 Modules overview with part numbers
e6516 Inscription strip templates for indication & operation equipment
Work and operational safety
i
Before personnel begin work on the system, they must have read and understood the
related operating instructions, in particular Chapter 1 ”Safety regulations”.

Siemens Cerberus CS1140 Specifications

General

Brand	Siemens
Model	Cerberus CS1140
Category	Security Sensors
Language	English