Siemens Cerberus CS1140 - Power Supply for Remote Transmission Equipment and Accessories

e4595e32
90
Fire & Security Products
Siemens Building Technologies Group
05.2003
32.5 Power supply for remote transmission equipment and accessories
with CC11  Equipment is connected to E3X10.
with CI11  Equipment is connected to E3G070
other equipment
(e.g. printer)
Remote transmission
or other equipment
(e.g. printer)
for RT:
Cable set Z3I390
required
Cable set Z3I390
required
E3X10.
RT
I-Bus
I-Bus
AlgoPilot B3Q...
E3G070
24V / 0.63A
24V / 0,63A
RT: 24V / 2ARes: 24V / 2A
RT = Remote transmission
CC11
CI11
Modules
B3Q... ...... Control terminal AlgoPilot all variants of the AlgoPilot  see page 42
E3X101 546674 Master module EPROM and RAM separately
E3X102 629025 Master module Flash-ROM and 1MB-RAM equipped
E3X103 629038 Master module Flash-ROM and 2MB-RAM equipped
E3G070 546661 Control module ’universal’ for alarm devices and control outputs
E3C011 505479 Battery charging unit
B2F020 470588 Converter 115/230V
AC  29,6VDC 6A
Z3I390 475729 Cable set ”Remote transmission CH”
AX1201 225487 Battery 12V / 27Ah
AX1209 462936 Battery 12V / 42Ah
AX1210 475570 Battery 12V / 15Ah