e4595e27
75
Fire & Security Products
Siemens Building Technologies Group
05.2003
27 Gateway
27.1 Main features
Connection C-Bus network DMS / LMS via V28 interface (RS232)
Conversion of C-Bus CERLOOP/CERBAN
For bridging distances of up to 1000m (double V28 modem integrated)
For distances >1000m use FSK/PSK modem
Per C-Bus network are several gateway possible, see chapter 7
Install preferably in the fire detection system control unit cabinet
Can also be autonomously operated with its own power supply
(E3C011 + B2F020 + batteries)
For the loop node CERLOOP, an additional hardware is necessary (K1H021...)
á Check outline quantities according chapter 7.3
Note:
Each ’CC’/’CI’ control unit must be assigned a DMS location num-
ber (via programming in AlgoWorks)
* any DMS location numbers according to document e4075
I-BUS
DMS/LMS
CERLOOP/
CERBAN
CT11 CT11
CC11
CI11
CK1142/43
C-BUS
CERLOOP (V28)
CERBAN (V28)
module
Detector
Line– Control–
E3H020
K1H021
K1D...
E3H020