Operation
5
135
Building Technologies A6V10380629_en--_a
Fire Safety 2015-09-10
a The highlighted list entry is displayed with a bright background.
7. Press 'Execute commands' on the dialog window toolbar.
a The 'Select command' dialog window opens.
8. Select the 'Non-MCP zones det.test' command.
a All automatic 'Detectors' are set to 'Detector test'.
a The 'DETECTOR TEST' LED on the Person Machine Interface is on.
a The command execution display confirms successful execution of the
command by displaying .
9. Test the 'Detectors'.
To Next Page
Loading...
