Siemens HiPath 3000 User Manual

HiPath Hotel Entry for reception and guests
13
The keys on add-on devices 2, 3 and 4 can be con-
figured on two levels (level 1 and level 2).
Use the Shift key on the add-on device to switch
from level 1 to level 2 and vice versa.
If the Shift key LED is not illuminated = level 1 is
active.
If the Shift key LED is illuminated = level 2 is active.
Control panel of the reception telephone – key
assignment
When you are not performing any hotel
functions on your reception telephone, the
illuminated room key LEDs on add-on de-
vices 2 and 3 indicate the room telephones
currently in use.
Ongoing calls are not indicated on add-on
device 4.
optiset E memory optiset E key module
Check-in
Check-out
Payment
Room cleaned
Wakeup OFF
Shift
Wakeup ON
Query
Service
Number redial
Speaker
Extension or
Micro. on/off
Trunk yes
Trunk no
Message ON
Message OFF
Payphone 1
Payphone 2
Settings
Alarm
optiset E key module 2, 3,4
Room no.
Room no.
Room no.
Room no.
Room no.
Room no.
Room no.
Room no.
Room no.
Room no.
Room no.
Room no.
Room no.
Room no.
Room no.
Room no.
Caracas.bk Seite 13 Donnerstag, 11. April 2002 4:22 16

Siemens HiPath 3000 Specifications

General

Brand	Siemens
Model	HiPath 3000
Category	Telephone
Language	English