Siemens HiPath 3000 User Manual

Settings for HiPath Hotel Entry
50
Changing call charge rate
If necessary, you can define a factor which is used
for multiplying the metering pulses (charge per
metering pulse). Three different call charge factors
can be defined, e. g. for the guest’s telephones
(guest), telephone booths (booth) or management
telephones (management).
1.
Press the key.
2.
Scroll until "Charge settings?" and confirm.
3.
Enter password
(maximum 5 digits, basic setting = 1 2 3
→ page 62).
4.
Confirm input.
5.
Scroll until "Charge rate: guest?" or "Charge rate:
payphone?" or "charge rate: mgmt?" and confirm.
The current factor is displayed.
6.
Scroll until "Change rate?" and confirm.
Settings
AD
L
B
F
K
GHE
J
C
I
Caracas.bk Seite 50 Donnerstag, 11. April 2002 4:22 16

Siemens HiPath 3000 Specifications

General

Brand	Siemens
Model	HiPath 3000
Category	Telephone
Language	English