Siemens HiPath 3000 User Manual

Alarm messages
75
Deleting alarm message
Call charge mem-
ory 80% full
– alerting signal
There are more than
3,600 data records in
the call charge mem-
ory, with the result
that it is 80% full.
You can create memory space by issu-
ing interim bills.
Call charge mem-
ory full
There are 4,500 data
records in the call
charge memory, with
the result that it is
full.
The data records belonging to unoccu-
pied rooms are erased automatically.
If necessary, the data records for all
calls already paid for are deleted.
If this is not sufficient to create memo-
ry space, instead of itemized charge
registration only the number of calls
and their total amounts are metered for
each hotel room.
As soon as sufficient data records
become available again, the system
reverts automatically to itemized regis-
tration.
Alarm message: Possible cause: Corrective measure:
1.
Press the flashing key. The corresponding mes-
sage is displayed(
→ page 74).
2.
Scroll until "Delete message?" and confirm to de-
lete message.
3.
To terminate input:
scroll until "Quit?" and confirm.
Alarm
Caracas.bk Seite 75 Donnerstag, 11. April 2002 4:22 16

Siemens HiPath 3000 Specifications

General

Brand	Siemens
Model	HiPath 3000
Category	Telephone
Language	English