Siemens HiPath 3000 - ActivatingDeactivating Acoustic Alarm

Settings for HiPath Hotel Entry
71
Activating/deactivating acoustic alarm
The alarm key flashes on the reception telephone
during alarm messages (
→ page 74) and a corre-
sponding message is displayed. The alarm signal is
also sounded. This audible signal can be activated
or deactivated as required.
1.
Press the key.
2.
Scroll until "Acoustic alarm?" and confirm. The cur-
rent setting is displayed. "Acoustic alarm yes/no".
3.
Scroll until "Change acoustic alarm?" and confirm.
4.
To switch over to "Yes" or "No": Scroll until "Quit?"
and confirm.
Settings
Caracas.bk Seite 71 Donnerstag, 11. April 2002 4:22 16