Siemens HiPath 3000 - From the Reception Telephone; Setting up or Changing Wakeup Service

Setting , changing, and cancelling
23
From the reception telephone
Setting up or changing wakeup service
1.
Press the key.
The LEDS are illuminated for all rooms which have
already been configured with a wakeup service.
2.
Enter the wakeup time as 4 digits (with leading ze-
ros, hours, minutes).
3.
Confirm the wake-up time.
4.
Enter the number of days (1 to 9 days) the guest
would like to be woken.
or
Key "∗" for more than 9 days.
5.
Confirm with the "Yes" key.
6.
Press the keys showing the required room num-
bers.
(The room number can also be input using the key-
pad and confirmed by pressing the "Yes" key.) The
display will read "Alarm set". If a wakeup time is al-
ready entered, the display will read: "Current wake-
up time: .. : .." The new wakeup time is accepted
using "Overwrite?".
Wakeup ON
...
1 9
*
Room 16
Caracas.bk Seite 23 Donnerstag, 11. April 2002 4:22 16