7 Operation at Use of a PC
7.3 Configuration of the Device
111SENTRON PAC5100/5200, 7KM5212/5412, Device Manual
E50417-H1040-C568-A1, Edition 03.2015
Save Configuration to File
You can save both the active and the passive configuration to a file. Proceed as follows:
✧ In the navigation window, select the Finish configuration menu and click Save Configuration to File.
Figure 7-15 Configure Tab, Save Configuration to File Input/Output Window
✧ Click either Save active configuration or Save passive configuration.
The Open/Save/Cancel button choice opens.
Figure 7-16 Open/Save/Cancel Button Choice
To Next Page
Loading...
