14 Operating Parameters
14.1 Process Connections
247SENTRON PAC5100/5200, 7KM5212/5412, Device Manual
E50417-H1040-C568-A1, Edition 03.2015
14.1.3 LEDs
LED Default Setting Setting Range
RUN Device ready Not settable
ERROR -none- -none-
Battery Failure
Ethernet Link Error
Time Synchronization Error
Primary NTP Server Error
Secondary NTP Server Error
SD Card Error
H1
H2
-none- -none-
Device OK
Battery Failure
Settings Load
Settings Check
Settings Activate
Modbus TCP OK
Ethernet Link Error
Time Synchronization Error
Primary NTP Server Error
Secondary NTP Server Error
Daylight Saving Time
Default IP Address
Limit Violation y (y = 1 to 16)
Indication 1 from Remote
Indication 2 from Remote
Rotating Field Clockwise
Group Indication x (x = 1 to 4)
SD Card Error
Supply Voltage Event Available
Frequency Event Available
Volt. Unbalance Event Available
Indication inverted no no
yes
To Next Page
Loading...
