7 Operation at Use of a PC
7.3 Configuration of the Device
130 SENTRON PAC5100/5200, 7KM5212/5412, Device Manual
E50417-H1040-C568-A1, Edition 03.2015
7.3.4 HMI
7.3.4.1 Display Settings
Default Settings and Setting Ranges
To change the properties of the display, proceed as follows:
✧ In the navigation window, select the HMI menu and click LCD Property.
Figure 7-33 Configure Tab, Display Settings Input/Output Window
Table 7-8 Display Settings
Parameter Default Setting Setting Range
Contrast 8 0 to 10
Time until dimmed 10 0 min to 99 min
Refresh time 1000 330 ms to 3000 ms
Inverse display no no
yes
Phase label (L1,L2,L3) (L1,L2,L3)
(a,b,c)
Use password yes no
yes
To Next Page
Loading...
