8 Operation at Use of the Display
8.4 Parameterization
198 SENTRON PAC5100/5200, 7KM5212/5412, Device Manual
E50417-H1040-C568-A1, Edition 03.2015
8.4.2 Measurands Submenus
Submenu Display Number 1 through 11, 20 and 25: Measurands
• Voltage Vph-n, Voltage Vph-ph
• Current I
• Active Power P, React. Power Q, App. Power S, Total Power P, Q, S
• Power factor PF, Tot. Pwr.factor PF tot
•cos
• Frequency f
• Counter
• Phase unbal. Vnb, Inb
Figure 8-7 Submenus of the Display Numbers 1 to 11, 20 and 21, Various Measurands
Submenu Display Number 12 and 13: THDS Voltage and THDS Current
Figure 8-8 Submenu Display Number 12 and 13, THDS V and THDS I
Submenu Display Number 14: Phasor Diagram
Figure 8-9 Submenu Display Number 14, Phasor Diagram
NOTE
To return to the main menu from within any submenu, press the F4 MENU softkey.
1 to 11, 20, 21
Measurand
1.0 to 11.0, 20.0 , 21.0
Instantaneous
measurand
1.1 to 11.1, 20.1, 21.1
Maximum
1.2 to 11.2, 20.2, 21.2
Minimum
ENTER MAX MIN
INST.
MENU
12, 13
THD-V
THD-I
12.0, 13.0
Instantaneous
measurand
12.1, 13.1
Maximum
ENTER MAX INST.
MENU
14
Phasor diagram
14.0
Graphic
Phasor diagram
14.1
Table
Phasor diagram
ENTER TAB. GRAPH
MENU
To Next Page
Loading...
