11 Failures and LED Indications
11.4 Troubleshooting and Repair
226 SENTRON PAC5100/5200, 7KM5212/5412, Device Manual
E50417-H1040-C568-A1, Edition 03.2015
11.4 Troubleshooting and Repair
General Troubleshooting
You are not authorized to troubleshoot the defective device beyond the measures described in Chapter 11 and
make repairs yourself. Special electronic modules are inserted in the SENTRON PAC5100/5200 which can
only be replaced by the manufacturer according to the guidelines for Electrostatic sensitive devices (ESD).
If you suspect any damage on the device, Siemens recommends sending the entire device to the manufacturer.
For this purpose, it is best to use the original transport packaging or similar packaging.
Troubleshooting Based on Error Messages
The error messages can be saved as described in Chapter 7.2.5.2, section Save As.
The error messages can be printed as described in Chapter 7.2.5.2, section Open.
NOTE
Error messages are service information that you quote to the service department upon request in case of an
error.
To Next Page
Loading...
