EasyManua.ls Logo

Siemens SENTRON PAC5200 - Communication Interface; Environmental Conditions

Siemens SENTRON PAC5200
266 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12 Technical Data
12.1 General Device Data
231SENTRON PAC5100/5200, 7KM5212/5412, Device Manual
E50417-H1040-C568-A1, Edition 03.2015
12.1.3 Communication Interface
Ethernet (Connector Z)
12.1.4 Environmental Conditions
Ethernet, electrical
Connection Device top side
RJ45 connector socket
10/100Base-T acc. to IEEE802.3
LED yellow: 100 Mbit/s (off/on)
LED green:
flashing: active
on: not active
off: no connection
Protocol Modbus TCP
Voltage strength DC 700 V
Transmission rate 100 Mbit/s
Cable for 10/100 Base-T 100 to 150 STP, CAT5
Maximum cable length
10/100 Base-T
100 m, if well installed
Temperature data Operating temperature
Devices with display: the legibility of the display is
impaired at temperatures < 0 °C (+32 °F).
-25 °C to +55 °C
-13 °F to +131 °F
Temperature during transport -40 °C to +70 °C
-40 °F to +158 °F
Temperature during storage -40 °C to +70 °C
-40 °F to +158 °F
Maximum temperature gradient 20 K/h
Air humidity data Mean relative humidity per year 75 %
Maximum relative humidity 95 % 30 days a year
Condensation during operation Not permitted
Condensation during transport and storage Permitted
Altitude Max. altitude above sea level 2000 m

Table of Contents

Related product manuals