8 Operation at Use of the Display
8.1 General Operating Instructions
192 SENTRON PAC5100/5200, 7KM5212/5412, Device Manual
E50417-H1040-C568-A1, Edition 03.2015
8.1 General Operating Instructions
The SENTRON PAC5100/5200 with display can be operated both using HTML pages from the connected PC
and the softkeys at the device. This chapter describes the softkey-based operation.
The front softkeys F1 to F4 are used to set parameters, select measurands, and enter various settings.
The following table lists the icons which appear on the display when the softkeys are pressed.
Table 8-1 Control Functions of the Softkeys
Softkey Functions F1 F2 F3 F4
General Softkey Functions
Display of the instantaneous value
Canceling an action and returning to the action
displayed previously
Displaying the maximum value
Displaying the minimum value
Scrolling up
Scrolling down
Menu selection
Acknowledging the selection
Special Softkey Functions
Graphic representation of the value
Displaying the graph
Displaying additional information
Active energy supply
Active energy consumption
Inductive reactive energy
To Next Page
Loading...
