7 Operation at Use of a PC
7.5 Maintenance
181SENTRON PAC5100/5200, 7KM5212/5412, Device Manual
E50417-H1040-C568-A1, Edition 03.2015
7.5.4 Message Logs
7.5.4.1 Operational Log
To view and clear the Operational log (max. 128), proceed as follows:
✧ In the navigation window, select the Message Logs menu and click Operational log.
Figure 7-68 Maintenance Tab, Delete Log
✧ Enter the maintenance password into the Password field.
✧ Click Delete log in the input/output window.
All operational indications in the input/output window are deleted without backup. The indication no. 0001
appears in the log list: Clear Operational Log.
NOTE
The last 128 operational indications are displayed, older indications are automatically deleted.
NOTE
If you need the operational indications, for example for subsequent analysis, save or print them out as
described in Save Device Information and Message Logs.
To Next Page
Loading...
