7 Operation at Use of a PC
7.5 Maintenance
174 SENTRON PAC5100/5200, 7KM5212/5412, Device Manual
E50417-H1040-C568-A1, Edition 03.2015
7.5.1 Firmware Upload
During a firmware update, the device firmware, the default set of parameters, text libraries, HTML files or parts
thereof are updated.
To update the firmware proceed as follows:
✧ Select Firmware upload in the navigation window.
Figure 7-60 Maintenance Tab, Firmware Upload - Enable Upload Input/Output Window
✧ Enter the maintenance password
✧ Click Enable upload.
Figure 7-61 Maintenance Tab, Firmware Upload - Open Input/Output Window
NOTE
Before updating the firmware, Siemens recommends saving the current parameters set as described in section
Save Configuration to File.
NOTE
If you have activated the option in your web browser to transfer the local directory name together with the file
name when uploading files, then the total number of characters in the directory and file names may not exceed
126 characters. Otherwise, the firmware in your device will not be updated.
To Next Page
Loading...
