7 Operation at Use of a PC
7.5 Maintenance
182 SENTRON PAC5100/5200, 7KM5212/5412, Device Manual
E50417-H1040-C568-A1, Edition 03.2015
7.5.4.2 Error Logs
To view and clear the Error log (max. 128), proceed as follows:
✧ In the navigation window, select the Message Logs menu and click Error log.
Figure 7-69 Maintenance Tab, Delete Error Log
✧ Enter the maintenance password into the Password field.
✧ Click Delete log in the input/output window.
All error messages in the input/output window are deleted without backup. The indication no. 0001
appears in the log list: ***Error Log Cleared***.
NOTE
Error messages are service information that you quote to the service department upon request in case of an
error.
NOTE
If you need the error messages, for example for subsequent analysis, save or print them out as described in
Save Device Information and Message Logs.
To Next Page
Loading...
