Siemens SENTRON PAC5200 - Page 141

7 Operation at Use of a PC
7.3 Configuration of the Device
141SENTRON PAC5100/5200, 7KM5212/5412, Device Manual
E50417-H1040-C568-A1, Edition 03.2015
A new file is created after a PQDIF file has been completely recorded.
Figure 7-38 Creating PQDIF Files of the Measured Value Recorder
11:00 11:10
12:00 Time
11:00 11:10
12:00 Time
11:00 11:10 12:00
Time
11:15 11:30
11:40
1) 11:10 a.m. to 12:00 p.m. : 1st PQDIF file
2) 12:00 p.m. to 01:00 p.m. : 2nd PQDIF file
…
The device
shut down
The device
turn on again
The device
shut down
The device
turn on again
1) 11:10 a.m. to 12:00 p.m. : 1st PQDIF file
2) 12:00 p.m. to 01:00 p.m. : 2nd PQDIF file
…
1) 11:10 a.m. to 12:00 p.m. : 1st PQDIF file
2) 12:00 p.m. to 01:00 p.m. : 2nd PQDIF file
…
12:10
Data (recording status)