7 Operation at Use of a PC
7.4 Value View and Evaluation
167SENTRON PAC5100/5200, 7KM5212/5412, Device Manual
E50417-H1040-C568-A1, Edition 03.2015
To change the file transfer, proceed as follows:
✧ In the navigation window, select the Evaluation and Data Management menu and click File Transfer.
The File Transfer input/output window opens.
Figure 7-52 Value View and Evaluation Tab, File Transfer Input/Output Window
✧ Select the respective parameters in the list boxes according to Table 7-23.
Option: Single file download
✧ Click Download.
The Open/Save/Cancel button choice opens.
Figure 7-53 Open/Save/Cancel Button Choice
NOTE
The button Download only is displayed if a Record list is available.
To Next Page
Loading...
