Safety notes
2.5 Safety guidelines for transport
MD-34A
Operating Instructions, 08/2023, A5E52427535-AA
21
• If you want to use your device during a flight, first of all ask the airline company if you are
permitted to do so.
• When traveling abroad, ensure the power adapter can be used with the local mains
voltage. If this is not the case, you must acquire the appropriate adapter for your device.
Do not use any other voltage transformers!
Using the device in different countries
Verify the compatibility of local mains and power cable specifications are compatible
when using the PG abroad. If this is not the case, purchase a power cable that complies
with the local conditions. Do not use connection adapters for electrical appliances in order
to connect the device to them.
Damage from transport and storage
Device damage during transport and storage
If a device is transported or stored without packaging, shocks, vibrations, pressure and
moisture may impact the unprotected unit. If the packaging is damaged, this is an indication
that the device has already been severely impacted by ambient conditions and may be
damaged.
• See the note "Electric shock and fire hazard due to device damage".
• Keep the original packaging.
• Pack the device in the original packaging for transport and storage.
Electric shock and fire hazard due to device damage
A damaged device may be under hazardous voltage and start a fire in the machine or plant.
A damaged device has unpredictable properties and states. Death or serious injury may
occur and the device, machine, or plant may malfunction.
• Prevent installation and commissioning of a damaged device.
• Label the damaged device and keep it locked away.
• Have the device repaired without delay.
To Next Page
Loading...
Need help?
General
