Installing and connecting the device
3.3 Connecting the device
SIMATIC IPC377E
Operating Instructions, 2017/05, A5E40965249-AA
35
You can establish a network between the device and other computers via Industrial Ethernet.
The on-board LAN interfaces are twisted-pair TP interfaces that support data transmission
rates of 10/100/1000 Mbps.
Note
You need a category 6 Ethernet cable for operation at 1000 Mbps.
PROFINET RT can be operated via:
● Standard Ethernet interfaces
Use this software package to create, operate and configure an innovative network for Field &
Control level. Information on this can be found on the SIMATIC NET Manual Collection CD.
The software package and the documentation are not included in the product package.
You can find additional information on the Internet at: Technical support
(https://support.industry.siemens.com/cs/?lc=en-WW)
To Next Page
Loading...
Need help?
General
