Siemens SIMATIC IPC377E User Manual

Technical specifications
8.4 Technical data
SIMATIC IPC377E
Operating Instructions, 2017/05, A5E40965249-AA
75
Interfaces
COM
• RS 232, max. 115 Kbps, D-sub connector, 9-pin
• RS 232 /RS 422 /RS 485
1
(optional), max. 115 Kbps, D-sub connector,
9-pin
USB
• USB 2.0, high speed/high current,
• USB 3.0, high current
You can find additional information in the section Power supply 12" de-
vice (Page 77).
LAN interface X1 P1,
RJ45
Intel Ethernet Controller I211-AT
10, 100, 1000 Mbps
LAN interface X2 P1,
RJ45
Intel Ethernet Controller I211-AT
10, 100, 1000 Mbps
Keyboard, mouse Connection via USB port
1
In BIOS Setup, you can configure support for RS 232/ RS 422/ RS 485 for COM1 and COM2
ports.
8.4.2
Environmental conditions
Climatic ambient conditions
For permitted mounting positions, see section Preparing for installation (Page 21).
Temperature, tested in accordance with IEC 60068-2-1, IEC 60068-2-2 and IEC 60068-2-14
Ambient temperature in operation
12"
• When installed vertically in horizontal format
• When installed inclined, inclination vertical installa-
tion, inclination < ± 45 °
• When installed vertically in upright format, display
turned through ±90 °
• VESA installation
• 0 ... 40 °C
• 0 ... 40 °C
• 0 ... 40 °C
• 0 ... 40 °C
Temperature during storage/transport
-20 to +60 °C
Gradient
• Operation: Max. 10 °C/h
• Storage: 20 °C/h, no condensation
Relative humidity, tested in accordance with IEC 60068-2-78, IEC 60068-2-30
Operation
5 … 85 % at 30 °C, no condensation
Storage/transport
5 … 95 % at 25/55 °C, no condensation
Atmospheric pressure

Siemens SIMATIC IPC377E Specifications

General

Brand	Siemens
Model	SIMATIC IPC377E
Category	Industrial PC
Language	English