Siemens SIMATIC IPC377E

Maintaining and repairing the device
7.6 Installing the software
SIMATIC IPC377E
56 Operating Instructions, 2017/05, A5E40965249-AA
Procedure - removing
Pull out the connection plug.
Lay down the device's rear panel
including the drive.
Remove the indicated screws.
Take out the HDD.
Procedure - installation
Proceed in reverse order.
7.6
Installing the software
7.6.1
Reinstalling the operating system
7.6.1.1
Source for installation of the operating system
If the operating system is faulty, you can reinstall it with one of these DVDs:
● With the recovery DVD and "Documentation and Drivers" DVD
● With the Restore DVD
Recovery DVD