Siemens SIMATIC IPC377E User Manual

Technical specifications
8.4 Technical data
SIMATIC IPC377E
74 Operating Instructions, 2017/05, A5E40965249-AA
Conducted Emis-
sion(Telecommunications/Network
Port),
in accordance with IEC 61000-6-4
+ A1
0,15 - 0,5 MHz:
97 dB(μV) – 87 dB(μV) Q
84 dB(μV) – 74 dB(μV) M
0,5 MHz – 30 MHz:
87 dB(μV) Q / 74 dB(μV) M
Immunity to magnetic fields
100 A/m, 50/60 Hz according to IEC 61000-4-8
Main circuit board
Processor
• Intel Celeron N3160: Quad Core, 1.6 GHz, burst frequency
2.24 GHz, 2 MB 2nd level cache, 6 W TDP
Main memory
DDR3L memory up to 8 GB, 1× SODIMM modules / non-ECC
Expansion slots
• 1 Mini PCIe half-size slot
• 1 mSATA slot with USB2.0 bus signal
Drive, memory medium
Hard disk drive, optional
≥ 500 GB, 2.5" HDD
Floppy and CD-ROM drive
External, can be connected via USB port
1
USB stick
External, can be connected via USB port
1
Only to device USB port, not via USB hub
Graphics
Display, resolution
• 12" screen diagonal with backlighting,
resolution 1280 × 800 pixels, WXGA (Wide XGA)
Touch controller Resistive Touch controller ETP-CP-MER4485XRU
Touch screen analog resistive
Touch force with R0.8 Delin stylus pen, at 250g forces
Backlighting (MTBF)
Half brightness life time, typical
LCD
min. 50000 h at 25 °C, 50% brightness
Graphics controller
Integrated Graphic Controller
Resolution
• at least support 2 channels: 1 x VGA(DB-15) + 1 x DP(DDI)
• 32bit, support from 640*480 pixels to 1920*1200 pixels
• support backlight control

Siemens SIMATIC IPC377E Specifications

General

Brand	Siemens
Model	SIMATIC IPC377E
Category	Industrial PC
Language	English