Preface
SIMATIC MV500
8 Operating Instructions, 06/2018, C79000-G8976-C494-01
Explanation of the table:
● Authentication
Specifies whether authentication of the communication partner takes place.
● Encryption
Specifies whether the transfer is encrypted.
Opening ports by changing the parameter settings
Make sure that port "TCP/8765" is open when enabling the "Archiving/MMI" parameter.
Make sure that port "TCP/8000" is open when enabling the "TCP" parameter.
You can find additional information about these parameters in the section "Communication
> Interfaces" of the WBM online help.
The following and possibly other names not identified by the registered trademark sign
®
are
registered trademarks of Siemens AG:
SIMATIC ®, SIMATIC NET ®, SIMATIC MV ®, SIMATIC RF ®, SIMATIC Sensors ®
To Next Page
Loading...
Need help?
General
