● HTTPS Server
Enable or disable HTTP access to the WBM.
● HTTPS Port
Specify the port for HTTPS access to the WBM.
● HTTP Services
Specify how the WBM is accessed:
– HTTPS
Access to the WBM is only possible with HTTPS.
– HTTP/HTTPS
Access to the WBM is only possible with HTTP and HTTPS.
– Redirect HTTP to HTTPS
Access via HTTP is automatically diverted to HTTPS.
● Min. TLS version
Specify which minimum TLS version is used.
● Default Login Page
Specify the login page with which the WBM starts by default.
– Firewall
Logging into the WBM page for user-specific firewall.
– Configuration
Logging into the WBM.
● SMTP Client
Enable or disable the SMTP client. You can configure other settings in "System > SMTP
Client".
● Syslog Client
Enable or disable the Syslog client. You can configure other settings in "System > Syslog
Client".
● DCP Server
Specify whether or not the device can be accessed with DCP (Discovery and Configuration
Protocol):
– "-" (disabled)
DCP is disabled. Device parameters can neither be read nor modified.
– Read/Write
With DCP, device parameters can be both read and modified.
– Read Only
With DCP, device parameters can be read but cannot be modified.
Configuring with Web Based Management
4.5 "System" menu
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08 115
To Next Page
Loading...
Need help?
General
