You can use the file types as follows:
● For offline diagnostics
You can save the faulty configuration of a device as "RunningSINEMAConfig" via the WBM
and import it in STEP 7 Basic/Professional. No connection to a real device is required for the
diagnostics in STEP 7 Basic/Professional. You can export a corrected configuration and
load it as "SINEMAConfig" again using the WBM.
● For configuration
No connection to a real device is required to configure a device in STEP 7 Basic/
Professional. You can export the configuration and load it as "SINEMAConfig" to the real
device using the WBM.
X509 certificates
The following file types can be loaded into the device:
● .crt, pem, zip: Maximum file name length 255 characters
● .p12: Maximum file name length 248 characters
Description
The table has the following columns:
● Type
Shows the file type.
● Description
Shows the short description of the file type.
Configuring with Web Based Management
4.5 "System" menu
SCALANCE S615 Web Based Management
126 Configuration Manual, 11/2019, C79000-G8976-C388-08
To Next Page
Loading...
