Siemens SIMATIC S5-95F - Page 545

Operations List S5-95F
L PY0 to 31
PY64 to 127
PY32/33
PY35
PY36 to 38
PY59
N
N
N
N
N
N
NNN
170 to 285
170 to 285
Permissible only in OB13.
Load an input byte of the external digital/analog inputs
from the interrupt PII into ACCU 1.
Load an input byte of the onboard I/O inputs into
ACCU 1.
L PW 0 to 30
PW 64 to 126
PW 32
PW 36 to 38
NNN
NNN
295 to 400
295 to 400
Permissible only in OB13.
Load an input word of the external digital/analog inputs
from the interrupt PII into ACCU 1.
Load an input word of the onboard I/O inputs into
ACCU 1.
L FY N N N 10.4 Load a flag byte into ACCU 1.
L FW N N N 12 Load a flag word into ACCU 1:
byte n ACCU 1 (bits 8-15);
byte n+1 ACCU 1 (bits 0-7).
L DL N N N 32 Load a data word (left-hand byte) of the current data
block into ACCU 1.
L DR N N N 34 Load a data word (right-hand byte) of the current data
block into ACCU 1.
Opera-
tion
(STL)
Permissible
Operands
1 RLO depend.
2 RLO affected
3 RLO reloaded
123
Typical
Execution time
in µs
On- Ext.
board I/O
Function
S I, Q
F
YNY
YNY
2.4 7.2
7.2
Set operand to "1".
R I, Q
F
YNY
YNY
2.4 7.2
7.2
Reset operand to "0".
= I, Q
F
NNY
NNY
1.6 6.4
6.4
Assign value of RLO to operand.
L IB N N N 4.8 10.4 Load an input byte from the PII into ACCU 1.
L QB N N N 6.4 12 Load an output byte from the PIQ into ACCU 1.
L IW N N N 4.8 12 Load an input word from the PII into ACCU 1:
byte n ACCU 1 (bits 8-15);
byte
n+1 ACCU 1 (bits 0-7)
L QW N N N 6.4 12 Load an output word from the PIQ into ACCU 1:
byte n ACCU 1 (bits 8-15);
byte
n+1 ACCU 1 (bits 0-7)
Set / Reset Operations
Load Operations
for organization blocks (OB)
for program blocks (PB)
for function blocks (FB)
for sequence blocks (SB)
C-2 EWA 4NEB 812 6210-02