Operations List S5-95F
Oper-
ation
(STL)
Permissible
Operands
1 RLO depend.
2 RLO affected
3 RLO reloaded
123
Typical
Execution Time
in µs
On- Ext.
board I/O
Function
T PY0 to 31
PY64 to 127
PY32/33
PY33/34
NNN
NNN
70
70
Permissible only in OB13.
Transfer the contents of ACCU 1 to the interrupt PIQ with
updating of the PIQ.
Transfer the contents of ACCU 1 to the output with
updating of the PIQ.
T PW0 to 30
PW64 to 126
PW32
PW33
PW36 to 38
NNN
NNN
NNN
80
80
80
Permissible only in OB13.
Transfer the contents of ACCU 1 to the interrupt PIQ with
updating of the PIQ.
Transfer the contents of ACCU 1 to the output with
updating of the PIQ.
Reset counter to "0". Transfer comparison value.
T FY N N N 4 Transfer the contents of ACCU 1 to a flag byte.
T FW N N N 11.2 Transfer the contents of ACCU 1 to a flag word (into the
PIQ):
ACCU
1 (bits 8-15) byte n;
ACCU
1 (bits 0-7) byte n+1.
T DL N N N 27.2 Transfer the contents of ACCU 1 to a data word
(left-hand byte).
T DR N N N 27.2 Transfer the contents of ACCU 1 to a data word (right-
hand byte)
T DW N N N 32.8
Transfer the contents of ACCU 1 to a data word.
SI T Y
N Y 380 Start a timer (stored in ACCU 1) as a signal-contracting
pulse on the leading edge of the RLO.
SV T Y
N Y 380 Start a timer (stored in ACCU 1) as extended pulse
(signal contracting and stretching) on the leading edge of
the RLO.
SE T Y
N Y 380 Start an on-delay timer (stored in ACCU 1) on the
leading edge of the RLO.
SS T Y
N Y 380 Start a stored on-delay timer (stored in ACCU 1) on the
leading edge of the RLO.
SA T Y
N Y 380 Start an off-delay timer (stored in ACCU 1) on the trailing
edge of the RLO.
R T Y N Y 14 to 20 Reset a timer.
Transfer Operations (cont.)
Time Operations
for organization blocks (OB)
for program blocks (PB)
for function blocks (FB)
for sequence blocks (SB)
C-4
EWA 4NEB 812 6210-02
To Next Page
Loading...
Need help?
General
