Siemens SIMATIC S7-300 Module data User Manual

Analog modules
6.5 Analog input module SM 331; AI 8 x 14 Bit High Speed; synchronous; (6ES7331-7HF0x-0AB0)
S7-300 Automation System Module data
6-28 Manual, 08/2006, A5E00105505-04
6.5 6.5 Analog input module SM 331; AI 8 x 14 Bit High Speed; synchronous;
(6ES7331-7HF0x-0AB0)
Order number
6ES7331-7HF00-0AB0 or 6ES7331-7HF01-0AB0
Properties
● 8 inputs in 4 channel groups
● Measuring method adjustable per channel group:
– Voltage
– Current
● Resolution adjustable per channel group (13 bits + sign)
● Measuring range selection any, per channel group
● Programmable diagnostics and diagnostic interrupt
● Limit value monitoring adjustable for 2 channels
● Hardware interrupt can be set when limit exceeded
● High-speed refreshing of measured values
● Isochronous mode supported
● Electrically isolated to the CPU
● Electrically isolated to load voltage (not for 2-wire transducers)
Diagnostics
For information on diagnostics message consolidated at the "group diagnostics" parameter,
refer to the table
Diagnostics messages of analog input modules .
Hardware interrupts
You can set the hardware interrupts of channel groups 0 and 1 in STEP 7. However, always
set a hardware interrupt only for the first channel of a channel group, i.e. either at channel 0,
or at channel 2

Siemens SIMATIC S7-300 Module data Specifications

General

Series	S7-300
Manufacturer	Siemens
Protection Class	IP20
System	SIMATIC S7-300
Digital Inputs	Varies by module
Digital Outputs	Varies by module
Analog Inputs	Varies by module
Analog Outputs	Varies by module
Central Processing Unit	Varies by CPU model
Supply Voltage	24V DC or 120/230V AC
CPU Type	Varies (e.g., CPU 312, CPU 315, etc.)
Memory	Varies by CPU model
Communication Interfaces	MPI, PROFIBUS
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	10% to 95% (non-condensing)