Siemens SIMATIC S7-300 Module data User Manual

S7-300 Automation System Module data
Manual, 08/2006, A5E00105505-04
2-1
Power supply modules
2
Introduction
Various 24-VDC power supply modules are available for your S7-300 PLC and the
sensors/actuators.
Power supply modules
This chapter contains the technical data of the S7-300 power supply modules.
In addition to technical data, this chapter describes:
● The characteristics
● Wiring diagram
● Block Diagram
● Line protection
● Reaction to atypical operating conditions
2.1 2.1 Power Supply Module PS 305; 2 A; (6AG1305-1BA80-0AA0)
Order number "SIPLUS S7-300 module"
6AG1 305-1BA80-0AA0
Properties
Properties of the PS 305 power supply module (2 A):
● Output current 2 A
● Output voltage 24 VDC; short circuit-proof, open circuit-proof
● Connection to DC power supply
(rated input voltage 24/48/72/96/110 VDC)
● Safety isolation to EN 60 950
● May be used as load power supply

Siemens SIMATIC S7-300 Module data Specifications

General

Series	S7-300
Manufacturer	Siemens
Protection Class	IP20
System	SIMATIC S7-300
Digital Inputs	Varies by module
Digital Outputs	Varies by module
Analog Inputs	Varies by module
Analog Outputs	Varies by module
Central Processing Unit	Varies by CPU model
Supply Voltage	24V DC or 120/230V AC
CPU Type	Varies (e.g., CPU 312, CPU 315, etc.)
Memory	Varies by CPU model
Communication Interfaces	MPI, PROFIBUS
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	10% to 95% (non-condensing)