Siemens SIMATIC S7-300 Module data User Manual

Digital modules
3.34 Digital IO module SM 327; DI 8/DO 8 x DC 24 V/0.5 A; programmable (6ES7327-1BH00-0AB0)
S7-300 Automation System Module data
3-124 Manual, 08/2006, A5E00105505-04
3.34.1 Parameters of SM 327; DI 8/DX 8 x DC 24 V/0.5 A
Programming
The general procedure of programming digital modules is described in the chapter
Programming digital modules.
Parameters of SM 327; DI 8/DO 8 x DC 24 V/0.5 A, programmable
The table below provides an overview of configurable and defaults for SM 327; DI 8/DO 8 x
VDC 24/0.5 A.
The defaults apply if you have not set any parameters in
STEP 7 .
The comparison illustrates the parameters you can edit:
● using
STEP 7
● using SFC 55 "WR_PARM"
● using SFB 53 "WRREC" (for GSD, for example).
Parameters set in
STEP 7 may also be transferred to the module using SFCs 56 and 57, and
SFB 53 (refer to the
STEP 7 ) Online Help).
Table 3-28 Parameters of SM 327; DI 8/DO 8 x DC 24 V/0.5 A
Programmable using ... Parameters Range of
values
Presetting Parameter
type
Scope Data record
number
SFC 55,
SFB 53
PG
Digital output Yes/no No Dynamic Channel 1 Yes Yes
See also
Parameters of SM 322; DO 8 x DC 24 V/0.5 A (Page 3-77)

Siemens SIMATIC S7-300 Module data Specifications

General

Series	S7-300
Manufacturer	Siemens
Protection Class	IP20
System	SIMATIC S7-300
Digital Inputs	Varies by module
Digital Outputs	Varies by module
Analog Inputs	Varies by module
Analog Outputs	Varies by module
Central Processing Unit	Varies by CPU model
Supply Voltage	24V DC or 120/230V AC
CPU Type	Varies (e.g., CPU 312, CPU 315, etc.)
Memory	Varies by CPU model
Communication Interfaces	MPI, PROFIBUS
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	10% to 95% (non-condensing)