Siemens SIMOCODE pro V MR

Description of system components
8.11 Ground-fault module (EM)
SIMOCODE pro
152 System Manual, 05/2019, A5E40507475002A/RS-AD/004
8.11 Ground-fault module (EM)
The 3UF7 500-1AA00-0 and 3UF7 510-1AA00-0 ground-fault modules are suitable for use
with the SIMOCODE pro V/pro S basic units. 1 ground-fault module can be connected to
1 basic unit.
NOTICE
Use of residual current transformers
The 3UF7 500-1AA00-0 ground-fault module requires the 3UL22 residual current
transformer.
The 3UF7 510-1AA00-0 ground-fault module requires the 3UL23 residual current
transformer.
Requirements for use of ground-fault modules in combination with
SIMOCODE pro V basic unit:
Note
Requirements for use of a 3UF7 500-1AA00-0 ground-fault module with
SIMOCODE pro V PB
Use of a ground
-fault module requires a SIMOCODE pro V PB basic unit, at least version
*E02* or later (from 04/2005).
Note
Requirements for use of a 3UF7 510-1AA00-0 ground-fault module with
SIMOCODE pro V PB
Use of this ground
-fault module requires a SIMOCODE pro V PB basic unit, with at least
product version *E10* (from
09/2013).
Detailed information on ground-fault monitoring: See Chapter "Monitoring functions" in the
manual Parameterizing SIMOCODE pro
(https://support.industry.siemens.com/cs/ww/en/view/109743958
).