Mounting, wiring, connecting, system interfaces, configuration guidelines
12.3 System interfaces
SIMOCODE pro
242 System Manual, 05/2019, A5E40507475002A/RS-AD/004
Safety guidelines
ent / voltage measuring module may be connected to the right-hand system
interface of the decoupling module. Memory modules, addressing plugs or PC cables will not
be recognized there.
Note
Observe the color coding of the connecting cable (see diagram)
!
12.3.3 System interfaces on the digital modules DM-F Local and DM-F PROFIsafe
See System Manual SIMOCODE pro fail-safe digital modules
(https://support.automation.siemens.com/WW/view/en/50564852
), Chapter "Mounting and
connection."
To Next Page
Loading...
