Mounting, wiring, connecting, system interfaces, configuration guidelines
12.2 Wiring, connecting
SIMOCODE pro
220 System Manual, 05/2019, A5E40507475002A/RS-AD/004
Terminal assignment of the decoupling module
The following table shows the assignment of the removable terminals:
Table 12- 17 Pin assignment of the removable terminals of the decoupling module
—
SPE
1)
System shielding
1)
pro via terminal SPE with the maximum possible cross-section and
able as possible to the functional ground of the control cabinet,
e.g. to the grounded mounting plate of the control cabinet.
To Next Page
Loading...
