Technical data
15.8 Technical data of the operator panels
SIMOCODE pro
362 System Manual, 05/2019, A5E40507475002A/RS-AD/004
Note
Usage restrictions concerning the operator panel with display
•
SIMOCODE pro V PB basic unit: The operator panel with display can only be used with
SIMOCODE pro V PB basic unit from version *E03*.
SIMOCODE pro V PN, pro V EIP basic unit: An operator panel with display from version
*E07* is required for use with these basic units.
In combination with the SIMOCODE pro PN basic unit, version
*E09* or higher is required
when using the operator panel with the 3UF7210-1AA00-0 display.
In combination with the SIMOCODE pro MR basic unit, version *E09* or higher is
required when using the operator panel with the 3UF7210-1AA00-0 display.
When using the "Dry-running protection" function, the following operator panels with
display are necessary:
– 3UF7210-1AA00-0: ≥ E12
– 3UF7210-1AA01-0: ≥ E03
– 3UF7210-1BA00-0: ≥ E04
To Next Page
Loading...
