Overview of functions
5.5 Communication
SIMOCODE pro
System Manual, 05/2019, A5E40507475002A/RS-AD/004
55
PROFINET
PROFINET IO
SIMOCODE pro V PN and pro V PN GP have integrated PROFINET IO device
communication functions, such as:
● Integrated switch with two RJ45 ports
● Ethernet services: ping, arp, network diagnostics (SNMP) / BIB-2, LLDP, NTP
● Port diagnostics
● Deactivation of ports
● Media redundancy
● Shared device
● Device replacement without PG/PC
● I/O data
● Diagnostics and maintenance alarms
● Data records
● PROFIenergy
● PROFIsafe
Note
Use of PORT connections with SIMOCODE pro V PN GP basic units
Only PORT
1 can be used with SIMOCODE pro V PN GP 3UF7011-1A.00-2 basic units
OPC UA
In addition to the PROFINET IO device communication functions, SIMOCODE pro V PN also
has OPC UA server functions. Using these functions, an OPC UA client can access
SIMOCODE pro V PN data.
Web server
In addition to the PROFINET IO device communication functions, both the
SIMOCODE pro V PN High Performance device and the SIMOCODE pro V PN General
Performance device have an integrated web server function that permits access to the
service and diagnostic data from a PC on which a web browser is installed.
Detailed descriptions: See Chapter "PROFINET communication" in the
manual SIMOCODE pro - Communication
(https://support.industry.siemens.com/cs/ww/en/view/109743960
).
To Next Page
Loading...
