Description of system components
8.1 Basic units (BU)
SIMOCODE pro
System Manual, 05/2019, A5E40507475002A/RS-AD/004
83
SIMOCODE pro V PN GP basic unit
The SIMOCODE pro V PN GP General Performance basic unit for PROFINET is used in
combination with a current measuring module and an optional operator panel. It provides the
following expansion options by means of connecting an expansion module:
● Increased device functionality with additional inputs and outputs
● Connection of a residual current transformer
● Connection of a temperature sensor.
The following motor control functions are supported:
● Overload relay
● Direct starter (direct-on-line starter) and reversing starter
● Star-delta starter
● Circuit breaker control (MCCB)
● Control of a soft starter.
SIMOCODE pro V High Performance basic unit
The SIMOCODE pro V High Performance basic units are the fundamental components of
the SIMOCODE pro V device series and are used in combination with a current measuring
module or current / voltage measuring module and optional operator panel.
The following motor control functions are supported:
● Overload relay
● Direct starter (direct-on-line starter) and reversing starter
● Star-delta starter, possibly combined with reversing starter
● 2 speeds, motors with separate windings (pole-changing starters), possibly combined
with reversing starter
● 2 speeds, motors with separate Dahlander windings, possibly combined with reversing
starter
● Positioner control
● Solenoid valve control
● Circuit breaker control (MCCB)
● Soft starter control, possibly combined with reversing starter
The SIMOCODE pro V High Performance basic units provide the following expansion
options not offered by the SIMOCODE pro C, SIMOCODE pro S and
SIMOCODE PRO V PN GP basic units:
● Increased device functionality via various expansion modules according to need
● Use of a current / voltage measuring module in place of a current measuring module
● Additional inputs and outputs, as required
● Larger number of inputs and outputs
● Use of an operator panel with display in place of a standard operator panel.
To Next Page
Loading...
