Preface
Content of the Manual
This document is part of the SIMOTION D documentation package.
Scope
The
SIMOTION D4x5
Manual is applicable to the SIMOTION D425, SIMOTION D435, and
SIMOTION D445/D445‑1 devices, as well as the CX32, CBE30, and TB30 supplementary
system components.
A separate
SIMOTION D4x5‑2
Manual is available for the SIMOTION D4x5-2 devices including
the CX32‑2, CBE30-2 and TB30 system components.
Standards
The SIMOTION system was developed in accordance with ISO 9001 quality guidelines.
Content of the manual
The following is a description of the purpose and use of the equipment Manual:
● Description
Provides information about the SIMOTION system and its integration in the automation
environment.
● Operator Control (hardware)
Provides information about the structure and architecture of the devices.
● Interfaces
Provides information about the different interfaces of the devices, their pin assignment, and
possible applications.
● Technical data
Provides information about the properties and features of the devices.
● Dimension drawings
● Spare Parts/Accessories
Provides information about spare parts and accessories of the SIMOTION D4x5 and
SIMOTION CX32.
● Appendix
Provides information about the various standards and specifications fulfilled by the device.
● Index for locating information.
SIMOTION Documentation
An overview of the SIMOTION documentation can be found in the SIMOTION Documentation
Overview document.
SIMOTION D4x5
Manual, 04/2014 3
To Next Page
Loading...
