The SIMOTION D425/D435 can also be operated without a fan/battery module.
NOTICE
Higher operating temperature if ventilation clearances are too small
The 80 mm clearances above and below the components must be observed.
The unit protects itself from overheating by shutting down.
The
ventilation clearance is measured from the lower edge of the module, i.e. the fan/battery
module is not included in the dimension.
6.2 Dimension drawing of D445
0
Figure 6-2 Dimension drawing of SIMOTION D445
Dimension drawings
6.2 Dimension drawing of D445
SIMOTION D4x5
78 Manual, 04/2014
To Next Page
Loading...
