Siemens SIMOTION D4x5 Series User Manual

NOTICE
Higher operating temperature if ventilation clearances are too small
The 80 mm clearances above and below the components must be observed.
7.4.2.1 List of interfaces
The CX32 has the following interfaces:
●
4 DRIVE-CLiQ interfaces
● 4 digital inputs/outputs
● 4 digital inputs
● Power supply connector
Available interfaces
Table 7-12 Overview of available interfaces
Interface Name Connector type
DRIVE-CLiQ interface X100 DRIVE‑CLiQ socket
DRIVE-CLiQ interface X101 DRIVE‑CLiQ socket
DRIVE-CLiQ interface X102 DRIVE‑CLiQ socket
DRIVE-CLiQ interface X103 DRIVE‑CLiQ socket
Digital inputs/outputs X122 Micro Combicon, 1x12-pin
Power supply connector X124 Combicon, 4‑pin
Measuring sockets (T0, T1, T2, and M) X131 - X134 Sockets
Non-usable interfaces
Table 7-13
Overview of interfaces that cannot be used for the CX32
Interface name Interface Connector type
RS 232 interface (as of HW version B) X140 9-pin Sub-D connector
Supplementary system components
7.4 Controller Extension CX32
SIMOTION D4x5
Manual, 04/2014 97

Siemens SIMOTION D4x5 Series Specifications

General

Brand	Siemens
Model	SIMOTION D4x5 Series
Category	Control Unit
Language	English