The SIMOTION D445 must always be operated with a fan/battery module.
NOTICE
Higher operating temperature if ventilation clearances are too small
The 80 mm clearances above and below the components must be observed.
The unit protects itself from overheating by shutting down.
The
ventilation clearance is measured from the lower edge of the module, i.e. the fan/battery
module is not included in the dimension.
6.3 D445-1 dimension drawing
Figure 6-3 SIMOTION D445‑1 dimension drawing
Dimension drawings
6.3 D445-1 dimension drawing
SIMOTION D4x5
Manual, 04/2014 79
To Next Page
Loading...
